Frigoboat Control module Standard for BD35-50 Compressors
#E50896
Danfoss/Secop 3-pin electronic control module for their BD35 and BD50 compressors with input for 12/24v DC.
Currently Secop part number 101N0212. Replaces 101N0200, 101N0210 (E50895).
Frigoboat Filter Drier
E53275
Frigoboat Filter Drier
There are several remedial uses for this device to address a capillary tube blockage or evaporator plate damage:
– When a damaged evaporator plate needs to be replaced, this device will reduce the risk of contaminating the compressor.
– To address an excessive level of moisture in the system, introduced through poor servicing techniques, or from being drawn in as air from a leak on the suction side of the system when in a vacuum. The system should be evacuated by a professional marine refrigeration technician, any leaks repaired, and this Filter/Drier installed.
– When suspected dirt or debris is blocking the capillary tube, and remedial actions are unsuccessful, then the evaporator needs to be replaced and this device installed in line. An alternative solution to this last problem is the Cap Tube Filter; no evaporator replacement is necessary, but a professional marine refrigeration technician is required.
Comes pre-charged with R134a and the exclusive quick disconnect Frigoboat fittings.
Zincs for Frigoboat Keel Cooler
#E51525
Frigoboat
Replacements Zincs for Frigoboat keel cooler (one keel cooler uses 2 zincs)
Zinc Screws, for Frigoboat Keel Cooler
#AST5M121
Frigoboat
Replacement screws for Frigoboat Keel Cooler zincs.
Frigoboat keel cooler comes with two zincs.
Mounting Bracket for Frigoboat Compressors
#E52135
Frigoboat Mounting Bracket.
Bulkhead mounting of K35, K50, W35, or W50 compressor on a bulkhead or other vertical surface.
Stainless Steel.
Frigoboat Extension Tube Suction, 3ft
#E50255S
Frigoboat Extension tube, 3ft Suction.
Suction and Liquid tubes orders separately.
To extend standard length (9ft) on all evaporators.
When the 9′ of copper tubing on the Frigoboat evaporator is not long enough to connect to the compressor, than more tubing is needed to extend the suction and/or liquid line.
Each extension comes pre-charged be it for the suction (low pressure) side or the liquid (high pressure) side with territorial Frigoboat fittings for easy installation.
Offered in lengths of 3′ (1m), 6′ (2m), and 10′ (3m).
Frigoboat Extension Tube, Liquid 3ft
#E50255L
Frigoboat Extension tube, 3ft Liquid.
Suction and Liquid tubes orders separately.
To extend standard length (9ft) on all evaporators.
When the 9′ of copper tubing on the Frigoboat evaporator is not long enough to connect to the compressor, than more tubing is needed to extend the suction and/or liquid line.
Each extension comes pre-charged be it for the suction (low pressure) side or the liquid (high pressure) side with territorial Frigoboat fittings for easy installation.
Offered in lengths of 3′ (1m), 6′ (2m), and 10′ (3m).
Frigoboat Extension Tube Suction, 6ft
#E50260S
Frigoboat Extension tube, 6ft Suction.
Suction and Liquid tubes orders separately.
To extend standard length (9ft) on all evaporators.
When the 9′ of copper tubing on the Frigoboat evaporator is not long enough to connect to the compressor, than more tubing is needed to extend the suction and/or liquid line.
Each extension comes pre-charged be it for the suction (low pressure) side or the liquid (high pressure) side with territorial Frigoboat fittings for easy installation.
Offered in lengths of 3′ (1m), 6′ (2m), and 10′ (3m).