Frigoboat Keel Cooler System
FRIGOBOAT KEEL COOLER SYSTEMS
Water cooling with keel cooler saves more than 30% compared to air cooling.
Keel cooler eliminates the need of independent sea water pump.
Danfoss BD50 compressor with electrical consumption 50% lower than earlier compressor concepts.
Extremely compact dimensions.
Maximum efficiency.
Precharged system equipped with Frigoboat self sealing couplings.
Configuration with evaporators for fridges up to 15 cu.ft. and freezers up to 5 cu.ft.
Automatically runs with 12 or 24 Volts.
Automatic battery protection.
NO PUMP, NO FAN, NO NOISE!!!
Keel Cooler are available with either Thread ( E 50361 ) or Stud ( E 50722 ) mounts.
Also available with zincs: Thread (E503161Z) Stud (E50722Z) (Zinc is not required on boats with bonding systems)
Constructed in marine grade bronze and cupro-nickel.
Frigoboat Keel Cooler with zinc
# E50361Z
Frigoboat Thread Keel Cooler with Zinc.
Frigoboat Keel Cooler fitting Thread Mount. Similar to a regular thru-hull fitting, where the throat passes through the hull, and a nut is threaded onto the shaft and tightened.
The keel-cooler must be mounted within 5′ of the compressor.
A Frigoboat keel-cooler acts as the condenser for the system. The R134a refrigerant is circulated by the compressor, down through tubing in-bedded in the sintered bronze mounted on your hull. This is where the heat exchange takes place, removing the heat completely from the refrigerant and not into vessel.
NO PUMP! NO FAN! NO NOISE!!!
Choose either the model with zincs (E50361Z) or, if you can connect the keel cooler into your bonding system, choose the model without zincs (50361).
Frigoboat K50F Compressor
# E51975
Frigoboat K50F compressor with manual speed board.
Water cooling with keel cooler saves more than 30% compared to air cooling.
Keel cooler eliminates the need of independent sea water pump.
Secop BD50 compressor with electrical consumption 50% lower than earlier compressor concepts.
Extremely compact dimensions.
Maximum efficiency.
Precharged system equipped with Frigoboat self sealing couplings.
Configuration with evaporators for fridges up to 15 cu.ft. and freezers up to 5 cu.ft.
Automatically runs with 12 or 24 Volts.
Automatic battery protection.
NO PUMP, NO FAN, NO NOISE!!!
Frigoboat K35F Compressor
# E50345X
Frigoboat K35F compressor with manual speed board.
Water cooling with keel cooler saves more than 30% compared to air cooling.
Keel cooler eliminates the need of independent sea water pump.
Secop BD50 compressor with electrical consumption 50% lower than earlier compressor concepts.
Extremely compact dimensions.
Maximum efficiency.
Precharged system equipped with Frigoboat self sealing couplings.
Configuration with evaporators for fridges up to 15 cu.ft. and freezers up to 5 cu.ft.
Automatically runs with 12 or 24 Volts.
Automatic battery protection.
NO PUMP, NO FAN, NO NOISE!!!
Frigoboat Keel Cooler No zincs
# E50361
Frigoboat Thread Keel Cooler with NO ZINCS!
Frigoboat Keel Cooler fitting Thread Mount. Similar to a regular thru-hull fitting, where the throat passes through the hull, and a nut is threaded onto the shaft and tightened.
The keel-cooler must be mounted within 5′ of the compressor.
A Frigoboat keel-cooler acts as the condenser for the system. The R134a refrigerant is circulated by the compressor, down through tubing in-bedded in the sintered bronze mounted on your hull. This is where the heat exchange takes place, removing the heat completely from the refrigerant and not into vessel.
NO PUMP! NO FAN! NO NOISE!!!
Choose either the model with zincs (E50361Z) or, if you can connect the keel cooler into your bonding system, choose the model without zincs (50361).
Frigoboat Air Only Condenser
#E53125
Frigoboat additional air condenser that can be added to a Frigoboat K35F, K50F, W35F or W50F water cooled compressor system.
When your boat is out of the water, but you still need refrigeration, now you can simply switch from your keel cooler or traditional pumped-water cooled condenser to your air condenser.
No need to turn the refrigerator off or haul in ice blocks.
Component comes pre-charged wtih R134a and unique Frigoboat fittings for simply plug-and-play installation.
The condenser must be mounted next to the compressor.
It measures 8.375″ long, 4.75″ deep and 5.625″ tall.
Zincs for Frigoboat Keel Cooler
#E51525
Frigoboat
Replacements Zincs for Frigoboat keel cooler (one keel cooler uses 2 zincs)
Zinc Screws, for Frigoboat Keel Cooler
#AST5M121
Frigoboat
Replacement screws for Frigoboat Keel Cooler zincs.
Frigoboat keel cooler comes with two zincs.